Automated Tethered Profiler for Hydrophysical and Bio-Optical Measurements in the Black Sea Carbon Observational Site

TitleAutomated Tethered Profiler for Hydrophysical and Bio-Optical Measurements in the Black Sea Carbon Observational Site
Publication TypeJournal Article
Year of Publication2022
AuthorsOstrovskii, AG, Emelianov, MV, Kochetov, OY, Kremenetskiy, VV, Shvoev, DA, Volkov, SV, Zatsepin, AG, Korovchinsky, NM, Olshanskiy, VM, Olchev, AV
JournalJournal of Marine Science and Engineering
Volume10
Issue3
Pagination322
ISBN Number2077-1312
KeywordsBlack Sea, carbon flux, greenhouse gases, real-time data transmission, tethered profiler, winch
Abstract

Biogeochemical cycles of carbon transformation throughout the euphotic zone of the sea are controlled by physical processes, e.g., daily thermocline, variation in solar irradiance, thermohaline convection, and intermittent mixing. These processes should be regularly observed with sufficient time resolution at fixed geographical locations. This study provides a brief overview of the carbon observational site in the Northeastern Black Sea. The focus is on the design of a new tethered profiler Winchi for the inner continental shelf part of the site. The profiler hull and two outriggers comprise an open trimaran platform that is positively buoyant and tends to maintain a horizontal position in the water. The lower end of the winch wire is secured to the bottom anchor. By unwinding/winding the wire, the profiler ascends/descends while measuring the depth profiles of marine environment parameters ranging from the seafloor to air–sea interface. After surfacing, the profiler determines its location using the Global Positioning System (GPS) and transmits data to (and from) a server on land through the Global System for Mobile Communications (GSM). Initial field tests with the Winchi profiler at the Northeastern Black Sea shelf exhibited promising results. We report these early tests to demonstrate the use of Winchi.

DOI10.3390/jmse10030322